Vapesourcing
06-27-2018, 03:16 AM
When we purchase e-cigarettes (https://vapesourcing.com/), we will see the names of atomizers or pod cartridges in the product introduction. For the friends who often smoke e-cigarettes, these two terms are not new, and they can be quickly distinguished. For friends who are new to e-cigarettes or are about to smoke e-cigarettes, they will be confused to see them. What is the difference between an electronic cigarette atomizer and a pod cartridge?
The atomizer (https://vapesourcing.com/atomizer-tank.html) is a separate part of the e-cigarette. It is a device for containing and heating the e-liquid. There must be at least one component on the top or bottom of the atomizer that can be removed so that we can fill the e-liquid. The heating wire in the atomizer generates heat after being energized and heats the e-juice in the chamber.
https://vapesourcing.com/wp/wp-content/uploads/atomizer-info.jpg
The atomizer's selectivity to the heating wire can be relatively wide, and different heating wires can withstand relatively large power, and the power is an important factor in determining the amount of smoke in the electronic cigarette.
The atomizer is a separate part and does not contain e-juice (https://vapesourcing.com/e-juice.html) itself, so we need to fill it ourselves. And the size of the atomizer is not limited, the design can also be varied.
A pod cartridge is a sealed or semi-sealed device. Pod cartridges (https://vapesourcing.com/atomizer-tank/replacement-pod-and-cartridge.html) have been filled with e-juice before being shipped from the factory. The former pod cartridge is sealed and integrated with the electronic cigarette battery rod. The battery rod and the cartridge are inseparable.
https://vapesourcing.com/wp/wp-content/uploads/one-Pod-cartridges.jpg
Later, with the progress of electronic cigarette industry technology. The cartridge can be no longer welded to the battery rod. It can be removed, and the soft plug at the top of the cartridge can be removed. We can use special tools to fill the e-juice into the cartridge for repeated use. The pod cartridge can only be used on pod systems.
Because the volume of the cartridge is relatively small, only the atomized cotton or the low-power heating wire can be used, which limits the amount of smoke and the capacity of the e-juice. At the same time, the appearance of the cartridge has also been basically fixed and no major changes can be made.
So today I will introduce you guys three kinds of pod cartridges:
Suorin Drop Replacement Pod Cartridge (https://vapesourcing.com/suorin-drop-replacement-pod-cartridge-2ml.html)
Suorin iShare Replacement Pod Cartridge (https://vapesourcing.com/suorin-ishare-replacement-pod-cartridge.html)
Suorin Vagon Replacement Pod Cartridge (https://vapesourcing.com/suorin-vagon-replacement-pod-cartridges-2ml.html)
The atomizer (https://vapesourcing.com/atomizer-tank.html) is a separate part of the e-cigarette. It is a device for containing and heating the e-liquid. There must be at least one component on the top or bottom of the atomizer that can be removed so that we can fill the e-liquid. The heating wire in the atomizer generates heat after being energized and heats the e-juice in the chamber.
https://vapesourcing.com/wp/wp-content/uploads/atomizer-info.jpg
The atomizer's selectivity to the heating wire can be relatively wide, and different heating wires can withstand relatively large power, and the power is an important factor in determining the amount of smoke in the electronic cigarette.
The atomizer is a separate part and does not contain e-juice (https://vapesourcing.com/e-juice.html) itself, so we need to fill it ourselves. And the size of the atomizer is not limited, the design can also be varied.
A pod cartridge is a sealed or semi-sealed device. Pod cartridges (https://vapesourcing.com/atomizer-tank/replacement-pod-and-cartridge.html) have been filled with e-juice before being shipped from the factory. The former pod cartridge is sealed and integrated with the electronic cigarette battery rod. The battery rod and the cartridge are inseparable.
https://vapesourcing.com/wp/wp-content/uploads/one-Pod-cartridges.jpg
Later, with the progress of electronic cigarette industry technology. The cartridge can be no longer welded to the battery rod. It can be removed, and the soft plug at the top of the cartridge can be removed. We can use special tools to fill the e-juice into the cartridge for repeated use. The pod cartridge can only be used on pod systems.
Because the volume of the cartridge is relatively small, only the atomized cotton or the low-power heating wire can be used, which limits the amount of smoke and the capacity of the e-juice. At the same time, the appearance of the cartridge has also been basically fixed and no major changes can be made.
So today I will introduce you guys three kinds of pod cartridges:
Suorin Drop Replacement Pod Cartridge (https://vapesourcing.com/suorin-drop-replacement-pod-cartridge-2ml.html)
Suorin iShare Replacement Pod Cartridge (https://vapesourcing.com/suorin-ishare-replacement-pod-cartridge.html)
Suorin Vagon Replacement Pod Cartridge (https://vapesourcing.com/suorin-vagon-replacement-pod-cartridges-2ml.html)