Eric G. Montgomery
10-10-2018, 03:20 AM
Best BF Squonk Mod For Vandy Vape Paradox RDA Tank Atomizer
Vandy Vape Paradox BF RDA Tank
https://www.vaporl.com/pub/media/catalog/product/p/a/paradox_rda_1.jpg
The Vandy Vape Paradox RDA is a new single coil rebuildable tank, comes with 24mm in diameter, 23.5mm in height and the maximum juice capacity is 1.5ml. It is made of stainless steel. It features 3 types drip tips to satisfy your different needs. It adopts the new annular airflow design, the air flow into the annular, converge in the middle then to the mouth.
Paradox BF RDA Comes With:
Vandy Vape Paradox RDA
Accessory bag
510 drip tip
PEI drip tip
510 drip tip adaptor
User manual
Order Vandy Vape Paradox BF RDA (https://www.vaporl.com/vandy-vape-paradox-bf-rda-tank-atomizer.html) Tank Now!
Wotofo Recurve Squonk 80W Box Mod
https://www.vaporl.com/pub/media/catalog/product/w/o/wotofo_recurve_squonk.jpg
The Wotofo Recurve Squonk Mod is another collaboration between Mike Vapes and Wotofo. The Recurve can use either the 20700 or 21700 sized batteries; but you can also use the included battery sleeve to use 18650 or 20650 size batteries. The Recurve is a semi-regulated mechanical mod; meaning it lacks any adjustment buttons a typical box mod would have, but is designed to work with resistances of 0.08-3.0ohms by intelegantly reading the ohm's of the coil / RDA connected. The squonk bottle sizes up to 8ml and can be refilled be removing the bottom panel (see photo). Lastly, there is a LED indicator light behind the squonk bottle, bright enough to shine though, letting you know how much liquid is left in the bottle.
Specification:
Dimensions: 60.5mm x 27.0mm x 90.0mm
Material: Zinc Alloy + Special Rubber Coating
Battery Type: Single – 18650, 20650, 20700, 21700 (Battery Not Included)
Output Voltage: 3.2 – 4.2V
Squonk Bottle Capacity: 8mL
Max Charging Current: 2A
Resistance Range: 0.08 – 3.0 ohms
Comes With 2 Battery Adapters
Comes With USB Charging Cable
Click to buy Wotofo Recurve Squonk Box Mod (https://www.vaporl.com/wotofo-recurve-squonk-85w-box-mod-8ml.html) Now!
Vandy Vape Pulse 80W BF Box Mod
https://www.vaporl.com/pub/media/catalog/product/8/0/80wpulsevaporl.jpg
The Pulse BF 80W box mod from Vandy Vape designed by Tony B. is a lightweight 8mL squonking device powered by a 18650 or 20700 cell (not included, sold separately), and driven by the all new Vandy Chip. The Pulse delivers up to 80W of power and supports temp control for Ti/Ni/SS316, with an additional User Defined Temperature Control Mode and User Defined TC Curve Set for detailed customization of the vaping experience.
Features:
Supports vaping while charging
Supports 1pc 18650 / 20700 battery ( not included )
Thread: 510
Charging time: 1h
Wattage range: 5 - 80W
Resistance range: 0.05 - 3 ohm ( VW ), 0.05 - 1.5 ohm ( TC )
TC range: 200 - 600 Deg.F / 100 - 315 Deg.C
Click to order Vandy Vape Pulse 80W Box Mod (https://www.vaporl.com/vandy-vape-pulse-bf-gene-80w-box-mod.html)
Dovpo Topside Squonk 90W TC Box Mod
https://www.vaporl.com/pub/media/catalog/product/d/o/dovpo_topside_tc_squonk_4_1.png
The DOVPO Topside 90W Squonk Mod is made in collaboration with The Vapor Chronicles, deploying the first top-fill squonk mod design with 10mL max capacity, single 21700 platform, and an intelligent chipset with BYPASS and optional Temperature Control. The DOVPO Topside 90W is created from Zinc Alloy and Aluminum Alloy to make it moderately impact-resistant in an ergonomic shape, with parts that have contact with eLiquid are made from food-grade Stainless Steel and silicone. The Topside has a single battery bay for a high-amp 21700 battery (sold separately) while leaving space for a 10mL squonk bottle adjacent for today's popular eJuice. Within the unit, the squonk bottle can be filled from the top, after unscrewing a knurled and threaded top cap. The squonking action on the Topside Box mod is found opposite of the firing button and display face and is made from food-grade silicone for a truly unique design. The leak-resistant 510 base is useful that it will not allow juice within the internals. Furthermore, the 510 base is gold-plated and spring-loaded for the best possible conductivity.
Specification:
Size: 54.0mm x 27.0mm x 92.0mm
Material: Zinc Alloy/Aluminum Alloy/Stainless Steel
(All parts that have contact with e-liquid are made from food grade stainless steel and silicone）
Battery: Single 21700 or 18650 with an Adaptor(not included)
Input Voltage: 3.2V-4.2V
Output Voltage: 1.0V-8.5V
Output Wattage: 5W-90W
Squonk Bottle Capacity: 10ml
Resistance Range: 0.08ohm-3.5ohm
Screen: 0.96 inch OLED
Working Mode: VW/TC/Bypass
Thread: Gold-plated Spring Loaded 510
Click to shop Dovpo Topside (https://www.vaporl.com/dovpo-topside-tc-squonk-90w-box-mod.html) Squonk 90W TC Box Mod
Vandy Vape Paradox BF RDA Tank
https://www.vaporl.com/pub/media/catalog/product/p/a/paradox_rda_1.jpg
The Vandy Vape Paradox RDA is a new single coil rebuildable tank, comes with 24mm in diameter, 23.5mm in height and the maximum juice capacity is 1.5ml. It is made of stainless steel. It features 3 types drip tips to satisfy your different needs. It adopts the new annular airflow design, the air flow into the annular, converge in the middle then to the mouth.
Paradox BF RDA Comes With:
Vandy Vape Paradox RDA
Accessory bag
510 drip tip
PEI drip tip
510 drip tip adaptor
User manual
Order Vandy Vape Paradox BF RDA (https://www.vaporl.com/vandy-vape-paradox-bf-rda-tank-atomizer.html) Tank Now!
Wotofo Recurve Squonk 80W Box Mod
https://www.vaporl.com/pub/media/catalog/product/w/o/wotofo_recurve_squonk.jpg
The Wotofo Recurve Squonk Mod is another collaboration between Mike Vapes and Wotofo. The Recurve can use either the 20700 or 21700 sized batteries; but you can also use the included battery sleeve to use 18650 or 20650 size batteries. The Recurve is a semi-regulated mechanical mod; meaning it lacks any adjustment buttons a typical box mod would have, but is designed to work with resistances of 0.08-3.0ohms by intelegantly reading the ohm's of the coil / RDA connected. The squonk bottle sizes up to 8ml and can be refilled be removing the bottom panel (see photo). Lastly, there is a LED indicator light behind the squonk bottle, bright enough to shine though, letting you know how much liquid is left in the bottle.
Specification:
Dimensions: 60.5mm x 27.0mm x 90.0mm
Material: Zinc Alloy + Special Rubber Coating
Battery Type: Single – 18650, 20650, 20700, 21700 (Battery Not Included)
Output Voltage: 3.2 – 4.2V
Squonk Bottle Capacity: 8mL
Max Charging Current: 2A
Resistance Range: 0.08 – 3.0 ohms
Comes With 2 Battery Adapters
Comes With USB Charging Cable
Click to buy Wotofo Recurve Squonk Box Mod (https://www.vaporl.com/wotofo-recurve-squonk-85w-box-mod-8ml.html) Now!
Vandy Vape Pulse 80W BF Box Mod
https://www.vaporl.com/pub/media/catalog/product/8/0/80wpulsevaporl.jpg
The Pulse BF 80W box mod from Vandy Vape designed by Tony B. is a lightweight 8mL squonking device powered by a 18650 or 20700 cell (not included, sold separately), and driven by the all new Vandy Chip. The Pulse delivers up to 80W of power and supports temp control for Ti/Ni/SS316, with an additional User Defined Temperature Control Mode and User Defined TC Curve Set for detailed customization of the vaping experience.
Features:
Supports vaping while charging
Supports 1pc 18650 / 20700 battery ( not included )
Thread: 510
Charging time: 1h
Wattage range: 5 - 80W
Resistance range: 0.05 - 3 ohm ( VW ), 0.05 - 1.5 ohm ( TC )
TC range: 200 - 600 Deg.F / 100 - 315 Deg.C
Click to order Vandy Vape Pulse 80W Box Mod (https://www.vaporl.com/vandy-vape-pulse-bf-gene-80w-box-mod.html)
Dovpo Topside Squonk 90W TC Box Mod
https://www.vaporl.com/pub/media/catalog/product/d/o/dovpo_topside_tc_squonk_4_1.png
The DOVPO Topside 90W Squonk Mod is made in collaboration with The Vapor Chronicles, deploying the first top-fill squonk mod design with 10mL max capacity, single 21700 platform, and an intelligent chipset with BYPASS and optional Temperature Control. The DOVPO Topside 90W is created from Zinc Alloy and Aluminum Alloy to make it moderately impact-resistant in an ergonomic shape, with parts that have contact with eLiquid are made from food-grade Stainless Steel and silicone. The Topside has a single battery bay for a high-amp 21700 battery (sold separately) while leaving space for a 10mL squonk bottle adjacent for today's popular eJuice. Within the unit, the squonk bottle can be filled from the top, after unscrewing a knurled and threaded top cap. The squonking action on the Topside Box mod is found opposite of the firing button and display face and is made from food-grade silicone for a truly unique design. The leak-resistant 510 base is useful that it will not allow juice within the internals. Furthermore, the 510 base is gold-plated and spring-loaded for the best possible conductivity.
Specification:
Size: 54.0mm x 27.0mm x 92.0mm
Material: Zinc Alloy/Aluminum Alloy/Stainless Steel
(All parts that have contact with e-liquid are made from food grade stainless steel and silicone）
Battery: Single 21700 or 18650 with an Adaptor(not included)
Input Voltage: 3.2V-4.2V
Output Voltage: 1.0V-8.5V
Output Wattage: 5W-90W
Squonk Bottle Capacity: 10ml
Resistance Range: 0.08ohm-3.5ohm
Screen: 0.96 inch OLED
Working Mode: VW/TC/Bypass
Thread: Gold-plated Spring Loaded 510
Click to shop Dovpo Topside (https://www.vaporl.com/dovpo-topside-tc-squonk-90w-box-mod.html) Squonk 90W TC Box Mod