Vapesourcing
07-13-2019, 03:10 AM
Hey, guys! This time I'm gonna share a new DIY DTL kit that consists of the iStick Rim Mod and the Crown 4 Tank. You may like it if you prefer to DIY devices rather than buy complete kits.
Let's first look at the iStick Rim Mod 80W (https://vapesourcing.com/eleaf-istick-rim-mod.html). It features gorgeous finishes designed with stunning IML technology, making colors brighter while ensuring longevity. The Low Poly rubber pad design on the back adds further artistry to it and ensures the device won't slip from your hands. The fire button is unique in that only the top part can be pressed. This design makes firing easier than ever and operation quick and comfortable.
https://vapesourcing.com/media/catalog/product/e/l/eleaf_istick_rim_2__1.jpg
Powered by a built-in 3000mAh battery, the mod has a maximum output of 80W, one should be able to sustain vaping for extended periods, without a recharge. At last, it also comes with multiple protections that include overcharge, over-puff, over discharge, over-current, dry burn and short circuit.
Then is the Crown 4 Tank Coils (https://vapesourcing.com/uwell-crown-4-tank.html). Measuring 28mm in base diameter, it can store up to 6ml of e-liquid and features as easy top filling design. Heating elements included in the set are a pre-installed Dual SS904L 0.4ohm coil head and a spare Dual SS904L 0.4ohm coil head. Each coil features a vertical coil arrangement and triple vertical wicking slots for rapid wicking.
https://vapesourcing.com/media/catalog/product/u/w/uwell_crown_4_iv_tank_1_.jpg
Moreover, the tank utilizes the new and improved Plug and Pull replacement coil style, with a threadless design that features reinforced seals to provide a liquid-tight fit and finish. Finally, the adjustable bottom airflow makes for smooth and effective airflow and can be fully closed to seal the system effectively. Overall, the Crown 4 is no doubt a perfect match to the iStick Rim Mod.
You may also like this: cheap voopoo drag mod (https://vapesourcing.com/voopoo-drag-157w-tc-box-mod-resin-version.html)
Let's first look at the iStick Rim Mod 80W (https://vapesourcing.com/eleaf-istick-rim-mod.html). It features gorgeous finishes designed with stunning IML technology, making colors brighter while ensuring longevity. The Low Poly rubber pad design on the back adds further artistry to it and ensures the device won't slip from your hands. The fire button is unique in that only the top part can be pressed. This design makes firing easier than ever and operation quick and comfortable.
https://vapesourcing.com/media/catalog/product/e/l/eleaf_istick_rim_2__1.jpg
Powered by a built-in 3000mAh battery, the mod has a maximum output of 80W, one should be able to sustain vaping for extended periods, without a recharge. At last, it also comes with multiple protections that include overcharge, over-puff, over discharge, over-current, dry burn and short circuit.
Then is the Crown 4 Tank Coils (https://vapesourcing.com/uwell-crown-4-tank.html). Measuring 28mm in base diameter, it can store up to 6ml of e-liquid and features as easy top filling design. Heating elements included in the set are a pre-installed Dual SS904L 0.4ohm coil head and a spare Dual SS904L 0.4ohm coil head. Each coil features a vertical coil arrangement and triple vertical wicking slots for rapid wicking.
https://vapesourcing.com/media/catalog/product/u/w/uwell_crown_4_iv_tank_1_.jpg
Moreover, the tank utilizes the new and improved Plug and Pull replacement coil style, with a threadless design that features reinforced seals to provide a liquid-tight fit and finish. Finally, the adjustable bottom airflow makes for smooth and effective airflow and can be fully closed to seal the system effectively. Overall, the Crown 4 is no doubt a perfect match to the iStick Rim Mod.
You may also like this: cheap voopoo drag mod (https://vapesourcing.com/voopoo-drag-157w-tc-box-mod-resin-version.html)